Do you want to paint your epoxy concrete floor on your own? If yes, then you must continue reading this out. This is because, here we are going to explain the best way to make your floor stunning with an epoxy concrete floor. These are the simple steps but you need to focus on the instructions to make your task easy.
Tools required for paint:
First of all, you need to prepare yourself for the paint. You have to get everything which is important for this task. Here is the list of tools required in epoxy concrete floor paint.
- 80-grit sandpaper
- hand sander
- paint roller brush
- tack cloth
These are the essential tools which you must get for painting your floor.
Material required for the paint:
Here, we are going to shed some light on the material required for the paint.
- acrylic epoxy paint to deal with concrete
- concrete bonding primer as well as a stain blocker
- degreasing solution
- acrylic-base masonry sealer
Now, we are going to share the steps which you need to follow for painting the floor with the help of epoxy concrete.
Step 1: wash the floor:
First thing which you need to do is to wash the floor. Clear all the dirt and dust from the floor. If there is any water leakage in your place, you should get it done immediately. Once the paint is done, you will be needed to leave the floor to dry. Here, you have to use the decreasing agent.
In order to clean the floor, you have to wash it with water and rub the floor with the help of a mop.
Step 2: Sand and Vacuum the Floor
If your floor has any cracked places, you need to remove them from the floor. This is because it will make it uneven. With the help of the vacuum, you have to clean the whole floor. After that, you have to use the tack cloth and clean the residue.
Step 3: Fill the holes:
Next thing you need to do is to fill the holes. In order to do so, you need to make patches and mix them with the concrete. With the help of a trowel, you have to press them on to the floor. Allow the floor to dry thoroughly. On the other hand, if you have a smooth floor, you can move to the next step.
Step 3: Time for primer:
In this step, you have to use the paint roller brush and apply two coats. Don’t forget to allow these coating to get dry.
Step 4: Apply paint:
Now, apply the paint and complete at least two coatings for a fine and excellent look.